ES-339, a small semi-acoustic made at Gibson’s Memphis factory, made in 2016.
The body is made of laminated maple, and a center block is placed inside to provide airy yet rich sustain. This model has the same construction as the ES-335, a typical semi-acoustic model, with the same scale but with a smaller body.
It is equipped with Burstbucker 1 & 2 pickups, and produces Gibson-like tones from a sweet clean sound with good punch to a dirty drive sound.
There is a chip on the truss rod cover.
There are some scratches and dings, and it shows moderate signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B : Some scratches, but no problems in normal use.
Serial number: 12946700
Year of manufacture: 2016
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity
Weight: 3.23kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.7mm
SCALE: 628mm (24.75″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B : Some scratches, but no problem for normal use
12 months old
Serial No.
12946700
Year of manufacture
2016
Country of Manufacture
United States of America
Case
Genuine hard case
Accessories
Certificate
Weight
3.23kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
43.0mm
Neck thickness near 1st fret
21.7mm
Neck thickness near 12th fret
24.7mm
Scale
628mm (24.75″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.