Fender Ritchie Blackmore Stratocaster 2009 [SN MSZ9315805] (12/25)

Richie Blackmore’s signature model is now in stock in used condition!

The body is made of alder, the neck is maple, and the fingerboard is rosewood with a scalloped finish.
The scalloped finish starts at the 4th and 5th frets, with a gradual scalloping on the 6th and 4th strings and a deeper scalloping on the 3rd and 1st strings, and it gradually becomes more pronounced as you move to the high position.

The neck shape is a U-shape, and a breaded truss rod is used.

The front and rear PUs are Seymour Duncan Quarter Pound Flat SSL-4.
The bridge PU is equipped with a reverse-wound, reverse-pole PU, which provides a hum canceling effect when the front and rear PUs are mixed.
A dummy PU is mounted in the center. The style of Blackmore is followed.

Flush Mounted Dunlop(R) Straplocks” are mounted on the strap pins.

The neck plate is equipped with “3-Bolt “F” Stamped with Micro-Tilt(TM)”, faithfully reproducing the early 70’s Fender style.

Overall, the guitar shows some dirt and signs of use, but there are no noticeable dents or scratches.
The metal parts are in relatively good condition, with some tarnishing and minor rusting.

The paint on the body neck pocket is floating, but it is not cracked and does not affect the playing.

The remaining fret height is about 1.0mm to 1.1mm. The neck is in good condition, and there is no sound jamming, chattering, or other problems with playing.
The truss rod has been checked to 90 degrees counterclockwise and 60 degrees clockwise, and it feels tight.

The operation has no problem in playing, and it is one of the ready-to-play guitars in good condition!

S/N: MSZ9315805
Weight: 3.69kg
Accessories: Fender tweed hard case, arm, hex wrench, owner’s manual, strap lock pin

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.