EVH Striped Series White with Black Stripes 2022
The EVH Striped Series White with Black Stripes, an early model with a white body, black stripes, single humbucker and a Floyd Rose, has arrived. Made in 2022 and weighing 3.41 kg. or 7.51lbs.
A S-style basswood body is joined to a bolt-on, straight grain maple neck reinforced with graphite. The back of the neck is hand-finished with satin urethane, and the compound radius, maple fingerboard is fitted with 22 jumbo frets and black dot inlays. An added bonus is the thumb wheel truss rod adjustment which is very convenient for fine-tuning the neck relief.
In addition to the direct-mounted “Wolfgang” humbucker, the simple one volume control is Eddie’s specification and utilizes a light torque pot. Other features include a single-ply black pickguard (White with Black Stripes model only), Floyd Rose locking nut, EVH branded locking tremolo and EVH D-Tuna, EVH die-cast tuners, vintage-style strap pins, and an EVH neck plate.
Fully functioning as it should, with fresh strings and a set-up for optimal playability. Cosmetically there are scratches throughout, with a concentration at the pickguard. Additionally, finish cracks are visible at the neck joint and the fretboard has darkened from use.
Accessories included:
- Gator soft gig case, tremolo arm
Condition:
- Truss rod: Room for adjustment
- Frets: 80% or more remaining
- Neck: Straight
- Nut width: Approximately 43mm
Specifications:
Body: Basswood Body
Finish: Gloss Urethane
Bridge: EVH®-Branded Floyd Rose® Locking Tremolo with EVH® D-Tuna®
Bridge Pickup : EVH® Wolfgang® Humbucker
Color: White with Black Stripes
Control Knobs : White Stratocaster®-Style Skirt (Labeled “Tone”)
Controls: Volume (500K EVH® Bourns® Low Friction Pot) with Treble Bleed Circuit
Dimensions: 4.50×15.30×42.20 inches
Fingerboard: Maple Fingerboard
Radius: 12″-16″
Compound Radius (304.8 mm to 406.4 mm)
Fret Size: Jumbo
Hardware Finish: Chrome
Headstock: Licensed Fender® Stratocaster® Neck
Construction: Bolt-On with Graphite Reinforcement
Neck Finish: Hand-Rubbed Satin Urethane
Neck Material: Quartersawn Maple
Neck Shape: EVH® Modified “C”
Neck Thickness: .790″ at 3rd Fret & .810″ at 12th Fret
Number of Frets: 22
Nut Material: Floyd Rose® R3 Locking
Nut Width: 1.6875″ (42.86 mm)
Pickguard: 1-Ply Black
Position Inlays: Black Dot
Scale Length: 25.5″ (64.77 cm)
String Nut: Floyd Rose® R3 Locking
Truss rod wrench compatibility: 2.5mm Hex
Tuning Machines: EVH®-Branded Gotoh®
——————————————————————————–
All customs duties, fees and import procedures are the responsibility of the buyer. Please be aware of the import duties & requirements in your country.
Should an item be returned due buyer’s failure to pay taxes, customs fees, etc. the cost of the return shipping charges will be subtracted from the refund amount.
Used items can be returned within 7 days of delivery. The cost of a return shipment, which must be trackable and insured, shall be borne by the buyer.
When packing an instrument for shipment we take every precaution to prevent damage during transit.
We always try to accurately convey the condition of our products, however please bear in mind that feel, performance and even condition are subjective. In light of this, please examine the photos carefully!
When examining a truss rod on a straight neck, we check that it can turn up to about 45 degrees in both directions. When we say the truss rod can be adjusted, we mean it can be adjusted up to 45 degrees. Anything beyond that risks damaging the instrument.
Please note that the product description was made at the time of listing and there may be a slight variance when you receive your instrument due to environmental factors such as temperature and humidity.
Regarding accessories, only those shown in the photo or listed as “Accessories” in the description are available.
This item is also on offer locally and might sell elsewhere.