Ibanez 1978 2681 -Bob Weir- Natural [SN L787273] [11/23]

$ 2688.63

Ibanez Professional Series has just received an American musician Bob Ware model from Ibanez.
The model consists of an arch-topped ash body, 3-piece maple neck, and ebony fingerboard.
Natural color with gold parts and tree of life inlays.
Two Super 80 pickups are mounted on this guitar, which gives it a crisp sound with a bite that is typical of ash.

There are scratches, dents, sunburn, cell deterioration, and dull parts.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.

Item Rank|B: Fairly scratched and used, but no problems in normal use.
Serial Number|L787273
Year of manufacture|1978
Country of manufacture|Japan
Case|Non-genuine hard case
Truss rod: No problem, confirmed up to 60 degrees on both sides of the rod (little left, big twist)
Fretboard: No problem, sufficient fretboard height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.4mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|D’Addario EXL110 / .010-.046set
Modified parts|
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair


Item Rank
B: Fairly scratched and used, but no problem for normal use.

Serial No.

Year of manufacture

Country of manufacture

Non-genuine hard case

-Hard case


Truss Rod
No problem (little remaining, large twist)

Remaining frets
No problem, there is enough fret height

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width

Neck Thickness (near 1st fret)

Neck Thickness (near 12th fret)

628mm (24.75″)

305mm (12″)

Strings for setup
D’Addario EXL110 / .010-.046set

Modification point

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair

Other Repairs

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.