Electric Guitar [SN I 191111160] Ibanez RG421HPAM ABL (Antique Brown Stained Low Gloss) Ibanez [3.41kg 2019] [01/02]

The Ibanez RG421HPAM is a hardtail model with exotic looks and DiMarzio pickups.

Ash top/nato body, Wizard III shaped loated maple neck, loated maple fingerboard with jumbo frets, DiMarzio Air Norton & DiMarzio The Tone Zone PU, 5-way selector with It is equipped with a coil-split, back-threaded F106 bridge.

This model incorporates the affordable yet uncompromising specs of the RG series, which boasts a good fit and high playability.

It shows signs of use (scratches, playing marks, picking marks, bridge imo screw marks on the bridge plate, fogging/bitz on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B : Some scratches, but no problems in normal use.

Serial number: I 191111160
Year of manufacture: 2019
Country of manufacture: Indonesia
Case: soft case
Weight: 3.41kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 21.7mm
SCALE: 648mm (25.5″)
RADIUS: 381mm (15″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B : Some scratches, but no problem for normal use

12 months old

Serial No.
I 191111160

Year of manufacture
2019

Country of Manufacture
Indonesia

Case.
Soft case

Weight
3.41kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
19.5mm

Neck thickness near 12th fret
21.7mm

Scale
648mm (25.5″)

RADIUS
381mm (15″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.