Gibson USA SG 61 Reissue with Bigsby/VIBRAMATE Heritage Cherry [SN 101311317] [01/02]

Gibson solid guitar SG ’61 style.
All mahogany thin body with two PAF sticker humbuckers.
Lightweight and easy to play, this one has a surprisingly warm tone with solid mids and lows.

It is equipped with a BIGSBY B7 and VIBRAMATE. Stock tailpiece included.
Weight is with Bigsby installed.
There is a scratch on the body back.
There are some scratches and dents, but nothing noticeable.
The neck is slightly twisted, but there are no problems with the playing condition.

Item Rank: B : Some scratches, but no problems in normal use.

Serial Number: 101311317
Year of manufacture: 2010
Country of manufacture: USA
Case: Original hard case
Accessories: Original tailpiece
Weight: 3.37kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 23.5mm
SCALE: 628mm (24.75″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs, etc.)

Item Rank
B : Some scratches, but no problem for normal use

12 months old

Serial No.
101311317

Year of manufacture
2010

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Genuine tailpiece

Weight
3.37kg

Truss Rod
No problem, rod has been checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
23.5mm

Scale
628mm (24.75″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.