Gibson SG Tribute -2019- Vintage Cherry Satin [SN 104690206] [12/28]

$ 1008.25

The SG has a traditional sound with a mahogany body, round shaped maple neck, and rosewood fingerboard.
The black 5-ply full face pickguard, open coil 490R/490T Alnico II pickups, vintage Deluxe tuners, Nashville Tune-O-Matic bridge, and aluminum tailpiece give it an old school look. The guitar also has a very old look with the Nashville Tune-O-Matic bridge and aluminum tailpiece.

There are some scratches, dents, and peeling paint.
The neck is in perfect playing condition.

Item Rank|B : Some scratches, but no problem in normal use.
Serial number|104690206
Year of manufacture|2019
Country of manufacture|USA
Case|genuine soft case
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard: No problem, enough fretboard height
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|24.2mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, alignment, deburring, screw hole correction, pot cleaning


Item Rank
B : Some scratches, but no problem for normal use.

Serial No.

Year of manufacture

Country of Manufacture
United States of America

Genuine soft case

-Soft case


Truss Rod
No problem, rod checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width

Neck Thickness (near 1st fret)

Neck Thickness (near 12th fret)

628mm (24.75″)

305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set


Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, deburring, screw hole correction, pot cleaning


*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.