Gibson SG Custom Walnut 1974

$ 5245.00

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.

Summary

Finish: Original

Body Material: Mahogany Body

Body Details: Solid mahogany body. There is a small repaired crack at the neck-body join.

Neck Material: Mahogany Neck

Neck Profile: “C” profile

Neck Thickness (IN): .77″ (1st fret), .94″ (12th fret)

Fingerboard Radius: 10.00″

Nut Width: 1-9/16″

Scale Length: 24 3/4″

Neck Details: Set-in three piece mahogany neck with bound ebony fretboard, block inlays, headstock volute, and headstock truss rod adjustment. There is a small repaired crack at the neck-body join, and some finish cracking around the heel.

Electronics: Original “tar-back” Gibson pickups, and original wiring harness with 3-way pickup selector switch (neck, middle bridge, bridge) and neck/bridge pickup volume and tone controls. Some solder joints have been touched up, and the middle switch position is out of phase. The pot codes date to 1972.

Pickup Measurements: 5.1k (neck), 7.6k (bridge), 7.6k (middle)

Hardware: Original

Weight: 7 lbs 14 oz

Cosmetic Condition: -Small repaired crack at the heel
-Some solder joints have been touched up

Modifications/Repairs: -Small repaired crack at the heel
-Some solder joints have been touched up

Tech Notes: The guitar plays well with low action and minor neck relief, and is currently set up with 10s. The truss rod is adjustable. The frets are narrow and low with small divots present below the fifth fret. The electronic components, serial number, and construction appointments date the guitar to 1974.

Case Details: Original hardshell case. The handle has been replaced.