[SN JD22009354] Fender Made in Japan Traditional 60s Stratocaster Rosewood Fingerboard Black Fender [3.33kg/2022] (11/15)

Very popular series “Made in Japan Traditional” Strat. This is a Fender Traditional 60s Stratocaster, made in 2022.

Basswood body, U-shaped maple neck, slab-applied rose fingerboard, mint green parts, and Vintage-Style Single-Coil Strat PU are used.

The vintage-style tone and high playability of this guitar are reproduced while maintaining the looks of the past.

It shows signs of use (minor scratches and dings around the body, scuffs and scratches from playing, picking marks, buckle marks, fogging and bits on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B : Some scratches, but no problem in normal use.

Serial Number: JD22009354
Year of manufacture: 2022
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.33kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.53mm
Neck thickness near 1st fret: 22.03mm
Neck thickness near 12th fret: 23.06mm
SCALE: 648mm (25.5″)
RADIUS: 241mm (9.5″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs & Condition

Item Rank
B : Some scratches, but no problem for normal use

12 months old

Serial No.
JD22009354

Year of manufacture
2022

Country of manufacture
Japan

Case
Soft case

Accessories
Arm

Weight
3.33kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.53mm

Neck thickness near 1st fret
22.03mm

Neck thickness near 12th fret
23.06mm

Scale
648mm (25.5″)

RADIUS
241mm (9.5″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.