FENDER USA American Standard Telecaster 3CS 2008 [SN Z8224502] (06/24)

$ 1359.04

Item rank: B : Some scratches, but no problem in normal use
Serial number: Z8224502
Year of manufacture: 2008
Country of manufacture: USA
Case: Hard case
Accessories: –
Weight: 3.510kg
Truss Rod: No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Height: No problem, enough fret height.
String Height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 43.32mm
Neck thickness (near 1st fret): 20.78mm
Neck thickness (near 12th fret): 22.36mm
Scale: 648mm (25.5″)
RADIUSEE41mm (9.5″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: –
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, removal of sticking saddle screws
Other: – Truss rod, fret rest, fret board, and fret board.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipping, we will inform you separately.


Item Rank
B : Some scratches, but no problem in normal use

Serial No.

Year of manufacture

Country of manufacture

Hard Case

-Hard Case


Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right

Leftover frets
No problem, there is enough fret height

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width

Neck Thickness (near 1st fret)

Neck Thickness (near 12th fret)

648mm (25.5″)

241mm (9.5″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set


Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, removal of sticking saddle screws


*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.