Based on the ’52-style Telecaster of yesteryear with ash body and maple neck/fingerboard, this model comes standard with front humbuckers, rotomatic pegs, and 6-way saddle.
It has high playability with a slim C-shape neck grip and a maple fingerboard with 184 radius.
Equipped with single coil and humbucker pickups, this TL52 Special model is designed for straight chord cutting.
It has a mass SPL bridge with octave adjustment for each string to obtain rich sustain.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and switch replaced, so it is in good playing condition.
The bridge piece has peeling plating, and there are some other minor scratches and dings, but it is in good condition with little signs of use.
Item rank: B (Good)
Year of manufacture: 2013
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories: soft case/not genuine
Country of Origin EEJapan
Weight EE3.59kg
Serial EEMIJ JD13009084
Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.6mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5″)
RADIUS|184mm (7.25″)
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut Width
42.6mm
Neck Thickness (near 1st fret)
22.0mm
Neck Thickness (near 12th fret)
23.0mm
Scale
648mm (25.5″)
RADIUS
184mm (7.25″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.