B.C.Rich Mockingbird Legacy ST Floyd Rose Black Burst [SN N08190094] (11/20)

B.C Rich’s signature shape, the Mockingbird, is now in stock.
It features a 3-piece hard rock maple through neck with nato body wings and an exotic quilted maple top. The pickups are mounted with DiMarzio D Activator.
The fingerboard is ebony with 24 frets and is equipped with a Floyd Rose, a typical locking tremolo.
Controls are 2vol/1tone with a varitone switch, individual coil taps, and a phase switch.

The back panel is missing.
There are some scratches and dents, but nothing noticeable.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B : Some scratches, but no problems in normal use.

Serial Number: N08190094
Country of manufacture: Korea
Case: Original soft case
Weight: 3.97kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.6mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 21.4mm
SCALE: 625mm (24.6″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B : Some scratches, but no problem for normal use.

12 months old

Serial No.
N08190094

Country of manufacture
Korea

Case
Genuine soft case

Weight
3.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.6mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
21.4mm

Scale
625mm (24.6″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.