This American-made Ovation deep bowl body, cutaway model is in stock.
Constructed with Sitka spruce top and ebony fingerboard. Equipped with OP24 preamp for easy and versatile sound creation.
There was a crack at the end of the 6th string side, so it was reinforced with glue.
There is a bulge on the top of the body.
There are some scratches and dings, but there are no noticeable damages.
The neck is slightly twisted and wavy, but there are no problems with the playing condition.
Item Rank: B : Some scratches, but no problems in normal use.
Serial Number: 446152
Country of manufacture: USA
Case: Original hard case
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.2mm above 12th fret
String height on treble string side: 2.2mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.8mm
SCALE: 648mm (25.3″)
RADIUS: 254mm (10″)
Strings in setup: D’Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, alignment, and correction of the crack at the 6th string end.
Specs: D’Addario EJ-16 / .012-.053 set
Item Rank
B : Some scratches, but no problem for normal use
12 months old
Serial No.
446152
Country of manufacture
United States of America
Case
Genuine hard case
Truss Rod
No problem, rod is confirmed to 60 degrees left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.2mm above 12th fret
String height on treble string side
2.2mm above the 12th fret
Nut width
43.0mm
Neck thickness near 1st fret
22.8mm
Scale
648mm (25.3″)
RADIUS
254mm (10″)
Strings for setup
D’Addario EJ-16 / .012-.053 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, alignment, correction of crack at the end of the 6th string side
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.