Headway HF-SAKURA DX III Natural [SN A01394] [01/13]

$ 2266.06

The Headway 40th Anniversary Limited Edition model exhibited at Sound Messe 2017 is now in stock!
This elegant model is made of someiyoshino, a cherry tree that is familiar to Japanese people, with superb wood grain on the sides and back. The top is made of Sitka spruce, mahogany neck and purple heart fingerboard.
The sound is luminous and louder than other cherry models, and the sound is so attractive that you can’t help but be attracted to it.
The cherry blossom motif inlays on the head, fingerboard, and pickguard are made of pink pearl.

Binding? The binding is glued.
There are some scratches and scuffs, but overall the guitar is in clean condition with little signs of use.
The neck is in good playing condition with no noticeable abnormalities.
The handle of the hard case has been replaced.

Item Rank: B : Some scratches, but no problems in normal use.

Serial number: A01394
Country of manufacture: Japan
Case: Original hard case
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 22.3mm
SCALE: 628mm (24.75″)
RADIUS: 406mm (16″)
Strings in setup: D’Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment

specs

Item Rank
B : Some scratches, but no problem for normal use

12 months old

Serial No.
A01394

Country of manufacture
Japan

Case
Genuine hard case

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
43.5mm

Neck thickness near 1st fret
22.3mm

Scale
628mm (24.75″)

RADIUS
406mm (16″)

Strings for setup
D’Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.