Inguy-style Strat with scalloped fretboard and DiMaggio HS-3 pickups.
It reproduces the specs of Ingvay’s favorite Strat, which was the following year.
This model was a stepping stone to the Ingvay Malmsteen signature model, the ST72-140YM, released in 1994.
With a basswood body, maple neck with scalloped fingerboard, jumbo frets, and HS-3 pickups on the front and rear, it is ideal for playing neoclassical-type superb technique.
There is a noticeable line scratch on the head top and scattered dents around the periphery of the head top.
The body also has numerous scratches and dings scattered throughout, and there is a small paint crack on the neck joint.
The brass nut has been replaced, the string guide has been replaced on the treble string side, the back panel is missing, and the metal parts are dull.
The back panel is missing and metal parts are tarnished.
Item Rank: B : Some scratches, but no problem in normal use.
Serial Number: P022626
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.45kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5″)
RADIUS: 241mm (9.5″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, tension nut installation
specs
Item Rank
B : Some scratches, but no problem for normal use.
12 months old
Serial No.
P022626
Year of manufacture
1993-1994
Country of manufacture
Japan
Case
Non-genuine soft case
Accessories
Arm
Weight
3.45kg
Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
42.3mm
Neck thickness near 1st fret
20.3mm
Neck thickness near 12th fret
22.3mm
Scale
648mm (25.5″)
RADIUS
241mm (9.5″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, tension nut installation
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.