Fender Japan’s MG69 is now in stock.
From the serial number, it is believed to have been produced between 2010 and 2012.
It has a basswood body, maple neck, and rosewood fingerboard.
Although it has some signs of use, it has been checked and adjusted as a whole by a professional repair person after arrival and is in good playing condition.
Item Rank: B : Some scratches, but no problems in normal use.
Serial number: U018730
Year of manufacture: 2010-2012
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.15kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 0mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.2mm
SCALE: 610mm (24″)
RADIUS: 184mm (7.25″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, string grounding correction, 1st string peg correction
Specs
Item Rank
B : Some scratches, but no problem in normal use
12 months old
Serial number
U018730
Year of manufacture
2010-2012
Country of manufacture
Japan
Case
Soft case
Accessories
Arm
Weight
3.15kg
Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
0mm above the 12th fret
Nut width
40.2mm
Neck thickness near 1st fret
21.3mm
Neck thickness near 12th fret
24.2mm
Scale
610mm (24″)
RADIUS
184mm (7.25″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, string ground correction, 1st string peg correction
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don’t hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.