Reasonable offers considered .
The body is almost exactly like my Suhr Standard. Pretty sure that the Cort shop in Korea took most of the design elements which Suhr and Baker created for the Fender Custom Shop Showmaster.
All parts are original including the USA Duncans. The trem bar is missing.
Frets are in excellent condition.
The veneer top is in great shape. The back has some worming especially by the trem cover and by the control cover (where there is also a little finish wear). There is also a small finish chip on the tip of the headstock. I focused on these areas in the pictures.
The neck has a really comfortable C shape. @ .81” at the 1st and .84” at the 12th. Rolled edges.
Guitar is light. Weighs 6.5lbs.
I’ll throw in a Gibson gig bag.
Basswood Body w/ Carved Quilt Maple Top
Maple Set-Neck Modern “C” shape w/ 15.75-inch radius and painted headstock
24 Jumbo Frets
Abalone Dot Position Inlays
Pickups 1 Seymour Duncan® SH-1N RP ‘59 Reverse Polarity Humbucking Pickup (Neck), 1 Seymour Duncan® SHPGP-1B Pearly Gates Plus Humbucking Pickup (Bridge)
Controls Master Volume, Master Tone
Pickup Switching 5-Position Blade, Special Switching:
Position 1. Full Bridge Humbucker (Coils in Series)
Position 2. Both Inside Single Coils (Coils in Series)
Position 3. Both Full Humbuckers
Position 4. Full Neck Humbucker (Coils in Parallel)
Position 5. Full Neck Humbucker (Coils in Series)
Bridge: 2-Point Synchronized Tremolo
Machine Heads Cast/Sealed Locking Tuning Machines
Knurled Smoked Chrome Control Knobs
Oversized Strap Buttons
Black Plastic Parts
Hardware Smoked Chrome
Scale Length 25.5″ (648mm)
Width at Nut 1.625″